Material Managing Energy UNIT two
Basic Description
This energy unit options power up gravity down circuit. Activate the commence solenoid to begin the motor to lift the machine. The lowing motion is activated through the solenoid valve using the lowering velocity managed from the stress compensated movement control valve. Solutions of this series could be extensively used in the market of logistic gadgets like fork lift, mini lift table, etc.
Particular Notes
one. The duty of this power unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean all of the hydraulic components concerned prior to mounting the electrical power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst,which should really also be clean and cost-free of impurities, N46 hydraulic oil is suggested .
four. Oil modifying is required soon after the original one hundred operation hours,afterwards as soon as each 3000 hrs.
five. The power unit really should be mounted horizontally.
Material Managing Power UNIT 1
Basic Description
This energy unit is created for your fork lift sector, consisting of hugely efficient gear pump, DC motor, guide 
increase and lower valve, tank, ect. The up and down motion are controlled from the lever on the guide release valve, and that is equipped with an electrical switch to activate the motor. The lowing speed is managed by the strain compensated movement control valve.
Particular Notes
1. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean every one of the hydraulic parts concerned just before installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which ought to also be clean and cost-free of impurities, N46 hydraulic oil is encouraged .
four. Oil modifying is required soon after the initial a hundred operation hrs, afterwards after every 3000 hrs.
five. The electrical power unit shown is intended to be mounted horizontally.