Product Description

 Hot Sale Factory Direct Price 160HP-200HP Four Wheel Farm Tractor In Georgia:

Tractor Model  WM1604/1654 WM1804/1854 WM2004/2104
Tractor Power  160HP/165HP 180HP/185HP 200HP/210HP
Drive type 4*4 4*4 4*4
Overall dimension(L * W * H) 5420×3400×3110 5420*3400*3110 5420×3400×3110
Wheelbase (mm) 2760 2760
Track(front/rear) 1720-2100/1680-2380single, (2380double)
Track(front/rear)regulating method Step/stepless Step/stepless Step/stepless
Minimum ground clearance 450 450 450
Min.operating weight(kg) 8050 8050 8050
Counterweight (max) (front/rear) 900/720 900/720 900/720
Gears(forward/reverse/creeper) 16+16 16+16 16+16
Theoretical speed of each gear(forward/reverse) 3.04-35.81/2.51-29.59 3.31-32.88/2.74-27.17 3.31-32.88/2.74-27.17
Engine
Brand Weichai CZPT or CZPT CZPT or CZPT Diesel Engine 
Engine type In-line, four-stroke In-line, four-stroke In-line, four-stroke
Intake mode Supercharged Supercharged Supercharged
Cylinder number 6 6 6
Bore 100 100 100
Stroke 127 127 127
Displacement(L) 6 6 6
Engine rated power Kw 117.6/121.3 132.3/136 147/154.4
Rated speed 2200 2400 2400
Air cleaner type Dry type Dry type Dry type
Type of cooling system Forced water-cooled Forced water-cooled Forced water-cooled
Max. Torque@ revolving speed (rpm) 627/1600±100 627/1600±100 627/1600±100
Fuel consumption at rated power (g/kw.h) ≤248 ≤248 ≤248
Fuel tank capacity 320 320 320
Steering Brake System
Type of steering system Hydraulic steering
Type of steering gear Cycloid orbitrol steering gear
Type of braking system Disc type (monochip), hydraulic control
Transmission System
Clutch type Dry type, double-action clutch
Gearbox type Two-axis mechanical gearbox
Gearbox shift mode Shift sleeve/synchro
Type of central transmission Spiral bevel gear type
Final transmission mode(front/rear) Single-stage planetary bevel gear/built-in single-stage planetary gear
Walking System
Frame type Frameless
Tyre model (front/rear wheels) 16.9-28/18.4-42(single row or double row tires optional)
Working Device
Type of hydraulic suspension system Open-center, separated type
Type of linkage Three point rear linkage
Linkage classes Class III
Lift capacity(610mm point) kN ≥28
Regulating mode Pusher-type lifter model:floating control, depth control. Electrical controlled lifter model:force control, position control, force and position combination control, floating control,draught-link sensing.
Type of PTO shaft Rear separated type
The number of PTO shaft splines 6 /8/21 splines
Outer diameter of PTO shaft spline φ35/φ38
PTO shaft speed 540/1000
Hydraulic System
Hydraulic output flow (L/min) 80 80 80

Detailed selling lead description:
With front loader and back hoe, the series tractor can do various kinds of job engineering with characteristics as following:
With the fluid driving on whole structure, it has characteristics as compact structure and agile operation, which leads it work freely in incommodious field where large machine can not achieve
The working implements are connected with tractor in quick linkage type, and the hydraulic pipes are connected by quick coupling, which are easy for assembly
The tractor hydraulic system affords power to front loader, back hoe, and tractor lift equipments
Hydraulic oil tank is designed according to the international standard, which is easy for maintenance

Usage: Farm Tractor, Garden Tractor
Certification: ISO, CE, CCC
Drive Wheel: 4WD
Emission Standard: Euro III
Fuel: Gas / Diesel
Service Life: 6-10 Years
Customization:
Available

|

Customized Request

Shaft Collar

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
Shaft Collar

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.

Shield

A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
Shaft Collar

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
China high quality Certified Farm Tractro 180HP 200HP 4WD Agricultural Wheel Tractor   pto shaft carrier bearingChina high quality Certified Farm Tractro 180HP 200HP 4WD Agricultural Wheel Tractor   pto shaft carrier bearing
editor by CX 2023-04-23